Error Codes for JLA
Like any sophisticated machinery, JLA laundry appliances might display error codes to indicate specific issues or malfunctions.
Error codes are typically unique to the model and type of machine. They can indicate a range of issues, from simple problems like an unbalanced load in a washer to more complex electrical or mechanical faults. Understanding these error codes is crucial for effective troubleshooting, maintenance, and ensuring the longevity of the equipment.
Need assistance?
Call us now on 0115 961 3720 to book an engineer. We’re always here to help
List of JLA Error Codes
Model: WASHER
| Error Code | Error |
| F10 | TEMPERATURE NOT REACHED WITHIN MAX TIME FRONT BOARD/POWER |
| F11 | NTS PROBE OR CIRCUIT FAILURE |
| F12 | NTS SHORT CIRCUIT |
| F13 | LEVEL SENSOR VOLTAGE LESS THAN .35VOLTS H-02 |
| F14 | P00 DOES NOT CORRESPOND WITH POWER BOARD,RESISTANCE R7 FAULT |
| F14/F20 | CHECK FRONT BOARD BLOWN TRACKS AND POWER BOARD |
| F15 | DOOR NOT CLOSED DURING OPERATION |
| F20 | CONNECTION ON THE CHOPPER MODULE |
| F21 | FREE-RUNNING DIODE SHORT CIRCUIT |
| F22 | MAINS SURGE VOLTAGE |
| F23 | IGBT SHORT CIRCUIT OR RELAY DEFECTIVE/CHECK MOTOR/CARBONS |
| F24 | CHECK MOTOR/BOARD |
| F24 | MOTOR SPEED SENSOR DEFECTIVE |
| F25 | TEMPERATURE DEFECTIVE |
| F26 | MAINS FAILURE |
| H00 | CHILD SAFETY DEVICE |
| H01 | WATER LEVEL NOT REACHED WITHIN 6MIN |
| H02 | WATER DIDN’T DRAIN. |
| H03 | DOOR NOT CLOSED,INSPECT DOOR LOCK |
| H04 | UNBALANCE TOO HIGH |
Model: 6KG DRY
| Error Code | Error |
| F10 | DRYING TOO SLOW |
| F11 | FAILURE OF NTC PROBE OR CIRCUIT |
| F12 | SHORT CIRCUIT IN THE PROBE CIRCUIT |
| F14 | P00 DOES NOT CORRESPOND WITH POWER BOARD,RESISTANCE R7 FAULT |
| F15 | NTC PROBE FOR OUT GOING AIR INTERRUPTED |
| F16 | NTC PROBE FOR OUT GOING AIR SHORT CIRCUITED |
| F17 | HEATING FAILURE CHECK ELEMENTS & CUTOUTS SEE TM226/ CHECK REAR BEARING |
| H00 | CHILD SAFETY DEVICE |
| H01 | NO FUNCTION ON THE MDB DRIER |
| H02 | COOLING WATER OUTFLOW |
| H03 | DOOR NOT CLOSED |
| H04 | FLUFF FILTER IS BLOCKED |
Still struggling with your JLA machine's error code?
Call us now on 0115 961 3720 to book an engineer. We’re always here to help